If you have previously registered, but forgotten your password, click here.

T O P I C     R E V I E W
jd2ksilver	Took off both door panels yesterday as I had clanging glass on drivers door when closing, and rattles on the passenger door. On the drivers door I found this piece stuck to the magnet of the speaker. Which goes here to press against the window for stability. So I put that back on after the found the nut at the bottom the window cavity. Then I found the passenger side almost ready to come off. (stay with me here) Problem is, before the first piece fell down, it got wedged between the regulator and the door, breaking off one corner of the bracket for the regulator. Thus making the regulator flop around inside the door panel, and bang on the glass when down and closing the door. So, I used two large tie wraps to clamp the regulator back in place, and it works good. Both doors are much better now. Now the $64,000 question What is this part number????? The door handle bezels. One has a old scratch on it, the other has two taps broken, (my bad) But I went to the dealer today with part in hand, and they cannot find the piece listed anywhere???? They suspect it is either part of the door panel unit, or handle unit, both are way expensive to buy just for the bezel. Help please???????// Thanks for reading,, ------------------ HEAR ME BREAK THE SOUND BARRIER...> This message has been edited by jd2ksilver on 03-23-2004 at 05:30 PM
Catwoman	will check with Curt Stall for ya.....he sent me this msg a few weeks back and maybe he got the part # too: "ya know the little plastic trim piece around the door handle? $65.63! When they had the door apart to do the window regulator, they found that the little trim piece has a couple broken tabs..." Debbie
jd2ksilver	That's what I was afraid of, it's a little steep don't you think?
WildCat	John, the right side part number is 0EK02PX9.......I do not remember how much it was but do not think it was as much as Debbie thought.
jd2ksilver	I just called my guy. That is the right part number all right. Price is lower but not much. It's the same part for some years of the Viper, man, talk about expensive toilets,, LoL
SirReal	For an even more expensive toilet at CarNuts.com you can buy this bezel in billet (brushed or polished) with Kat logo for $200. Jeff
ed monahan	Hard to believe you could get gouged on that site.
jd2ksilver	Good memory ED, I hear that's the second thing to go.
bruce hazelton	Silver,part number for right side has changed to TT06DX9AA list $52.10 POA price $34.38 Left is EK03PX9 and pricing is the same plus freight. Let me know if I can help. ------------------ Parts manager of a S. E. Wisconsin Chrysler/Ford dealership.262-763-9182 8-5 Central. 10% over cost on all parts to POA members. See post under accessories about "luggage rack price reduction".Owner of 01 Mulholland Edition with removed exhaust tip baffles, added front suspension brace, modified door hinge checks for wider opening, built screen insert behind grille to keep bugs from condensor, Mopar front splash guards, Mopar hitch, Weekender-lined, added Mulholland pinstripe and Chrysler wings emblem.
RADCAT RICH	J2K, dc should have used nylocks for the nuts!!!
jd2ksilver	quote: Originally posted by RADCAT RICH: J2K, dc should have used nylocks for the nuts!!! Didn't take the pic, but have them on both sides now.