Home Page | Owners Registry | Discussion Forums | ProwlerMall | Event Scrapbooks | About |
![]() |
| ||||
Want to register? |
If you have previously registered, but forgotten your password, click here.
Custom made, full-length floor and trunk mats. Only 2 sets exist in OEM color carpet with yellow script ... the second set resides (or did) in a small town east of Indianapolis. High polished factory '99 wheels that they took all the barrel ridges out, and results resemble chrome. Done by shop proficient in Harley show bikes. The rest ... everyone else has too. Many other mods not unique like removing front fenders/removing all bumpers/removing sun visors/removing windshield wipers/removing hood emblem/painting radio bezel/chrome tranny cover Other mods done and removed - Leather Covered Center Console Lid The last Prowler Pro 5.0 (I had to say that Terry...) Prowler Pro 5.0 Stage II SuperStroker Exhaust Prowler Pro/Belanger 5.0 custom mandrel bent Cooling System Custom aluminum Evans radiator TRANSMISSION / DIFFERENTIAL Prowler Pro high stall torque converter 2800 RPM THROUGH THE HOOD Prowler Pro Custom CNC aluminum Intake Manifold: MISC: Foose Legend wheels The original,,,,test mule model, Larry Lord FMBox, Prowler WONDERBAR BUDNIK Gasser Series wheels This message has been edited by ALLEY CAT on 06-13-2012 at 04:00 PM Hardtop Transmission temperature gauge mounted next to tach. My 2002 Candy Red has custom louvered aluminum side panels designed by me and Pete Chapouris of SoCal Speed Shop and fabricated by Pete. Hardtop, painted Candy Red bumpers, and a chrome OEM grille. My 2002 California Kid cat was built as a show car for Chrysler's Image Team. It is a 25th Anniversary Tribute car to the original California Kid car built by Pete Chapouris and Jake Jacobs. It's totally custom inside and out. Just a few of the mods - too many to list: Paxton Supercharger/Headers This message has been edited by CJ on 06-13-2012 at 09:43 PM 1. The unique mod is the custom made dual intake that goes down both sides behind the engine and exit under the car. They are seen poking out below the frame & body if you look close. They are also great for scooping up water while driving in the rain and may be coming off at some point for that reason. (On the car at time of purchase) 2. The fairly rare mod would be the Real Rod front bumperettes, or Nerf Bars (some call them snow plow's The other mods done at time of purchase were: 3. Custom painted flames on front end & fenders. Mod's done since purchase are: (sort of in order I think) 24.Raybestos Ceramic Front Brake Pads Items purchased to have but not yet in use: 35.Replacement "J" hooks for convertible top (A. Stoner item bought through Pantera) I think that is it but there is a chance I may have missed something. P.S. Personalized Maryland License Plate "PR0WLER" This message has been edited by alrtg on 06-14-2012 at 09:26 AM 8.125" AEM cone filter also rests on lower frame. Covers over door & window buttons are for a '98 Intrepid. MRK Group is the manufacturer, have no response from them for a Prowler kit. Also kind of rare is a dash kit.EssexExport What mods are rare or unique to your Prowler? Pictures welcome. StingRay Self-made, custom leather shifter boot on stock '99 style bezel. Eliminated the sliding plastic pieces, and gives te appearance of traditional stick shift. KOL CAT SUPERCHARGER intake scoop on left side panel Marty Usher Round/chrome Harley Softail headlights
Custom headlight filler panels
4.3 litre stroker engine
custom made headers
performance torque convertor
Torque Thrust custom wheels
Harley anniversery two wing wheel spinners
Hand painted blue faded to purple flames
One off rear pan with 39 Ford blue dot tear drop tail light
Blue flame ligfhte shifter knob
Chrome flame added to brake lever
light gray dyed steering wheel/brake lever
light gray leather seats/shifter boot/brake lever boot
removed headrests
custom tweed interior with blue leather flames
gray padded/3D flamed top dash
removed tail lights/filled in hole with fiberglass
installed larger chrome tach - self modified
Custom chrome 4" round side mirrors
1st custom rear pan
3.8 liter stroke engine
4.0 liter stroker engine
shorty headers
neon lights
nitrous system
George Maxey's original custom interiorTerry Leather Covered Sun Visors EdsCat The 1st Prowler Pro 5.0 Super Stroker in the South East
Custom welded indexed, hardened and nitrided crankshaft
Competition H-beam 4340 steel connecting rods
CNC machined seasoned block
Custom oversize cylinder liners
Balanced and blueprinted
Custom diamond turned forged pistons 11:1
Cylinder heads custom ported and flowed.
Block painted Hemi Orange
Custom stainless oversize valves
Custom high lift camshafts
Custom double valve springs
Titanium retainers
Single groove steel retainers
Additional OEM intake manifold port enlargement
Hand made Belanger primary tube headers/y pipe /
Custom upstream oxygen sensors
Dual throttle bodies
CNC 3 piece O-ring high flow intake
Fully functional EGR - PCV
Custom throttle cable mount (uses OEM throttle cables w/locks)
Custom TPS (throttle position sensor)
Vintage Hilborn scoop circa 1958
Custom rain bonnet for scoop (15 second installation)
Orange TPMS
Custom grill by Gary
Hardtop 2nd generation with black suede headlinerDave Mills just me..... WINDY CITY PROWLER I'm with dave Just Me. ALLEY CAT Features on the ALLEY CAT Prowler:
and one pair of lavender colored, fuzzy dice.....
Other mods:
Carlini Designs Tranny Cooler Cover
GaryE Chrome Headrest covers
RealRod Rolled Rear Pan
Tom Mills/Jefferson Auto Front Bumper Delete Covers
Tom Mills/Jefferson Auto New Generation Window Regulator
TGF Grill
RealRod Air Patrol Tinted
RealRod Sill Protectors
Dec-Pro-Tec Trunk Lid cover by Paul
Pinstriping along hood, door, and trunk lid by Mark
Magic Touch Designs Ground Hugger Cooler Air Intake System
Arizona Dry-Heat Air in All Tires
OEM Prowler Trailer Hitch
300 Chrome Gear Shift Knob
Sheepskin Express Luxury Sheepskin Seat Covers
Clear Side Marker Lights
Dash Designs Velour Dash cover Mat
Velour Seat Belt covers
LST of Canada Hood Support Struts
OEM Front and Rear Mud Flaps
Borla Prowler Cat-Back Exhaust System
Raybestos Ceramic Brake Pads
MGW Precision Chrome Hitch Plug
Optima Red Top Battery
G-Force Suspension Brace
Chrome Vertical Stabilizers Supports by Spoons
3" Chrome Exhaust Tips
Clear Back-up Light Lenses
Sunvisors Delete
Windshield Wiper Delete
Shimmers by Jay Steering Wheel Cat/Radio Bezel/Hand Handles
New OEM Windshield
Locking Gas Cap
So-Cal Bell Door Wider Opening Spacers
Tinted Side Windows
CLAWZ Personal License Plate
Rick Buehler Custom Battery Disguise Cover
Vinyl Graphic.net Two-step Flame Side Decals
Cutting Edge Designs Prowler Cat Decals
ALLEY CAT Chrome Grill Treatment System on OEM Grill
G-Force Deeper Gears Set
and much more.....xtreme prowler holy crap... where do I start ? beachcat Recently added:
Weekender
G-force KDW TAsxtreme prowler very nice shot roger .. great additions MDProwler One of a kind Real Rod bumper covers with LED turn signals. TLRandall The paint on the Yellow is pretty unique NRVOUS LOL! quote:
Originally posted by xtreme prowler:
holy crap... where do I start ?CJ My '99 Black only has one change - black bumpers. Other than that it is totally stock like all of Ed's cats!!!
Custom Leather Seat Covers with Prowler Logo/Katzkin
Custom Billet Grille/B-Cool Billets
Embroidered Carpet Mats/Designer Mat
Custom Rear Roll Pan/Hot Rods & Custom Stuff
Custom Hard Top
One-off Custom wheels (same as original Kid car)/Colorado Custom Wheels
Paint by Mike Face
Flames by Little Louie
ed monahan Is that Paul Brown Stadium in the last one on the left ?
I see the Carew Tower in the background.CJ I don't know!
That was taken when we were there for the Tall Stacks event!!
alrtg My Kat has one unique mod and one that is fairly rare along with a few other mod's. Here Goes..... ) They are solid and chromed. I however have seen other versions on a few cars. (I added this mod)
4. Custom painted flames on dash.
5. Door panel inserts with custom painted flames. (do ya see a theme here?)
6. Painted Plenum intake with flames to compliment exterior paint.
7. Chromed to the 9's under the hood and throughout the car.
8. Chromed lift supports for hood and trunk.
9. Relocated front turn signals behind grille. (Now gone)
10."Blacked out" side marker lights. (Now gone)
11.Drilled & Slotted Front Rotors
12.Paxton headers.
13.X-pipe.
14.Borla Muffler.
15.Carbon Fiber exhaust tips.
16.Mill's Rear body panel.
17.TGF rear spoiler.
18.Custom carpeted rear trunk area.
19.Dyna Mat installed throughout interior, inside doors, and trunk.
20."Tinted Tail Lights" (spray painted black) (Now gone)
21. Performance Gears
22. Deleted Bumpers, front & rear.
23. Deleted rear fender paint protection pads.
-20.Replaced modified tail lights with stock ones.
-8. Replaced front hood support struts with stock style. (L.S. Technologies ones would not fit car for some reason)
25.Replaced Blacked out side marker lights with clear ones.
2. Per above, Installed Used Real Rod Nerf Bars.
26.Mill's Turn Signal relocation kit.
27.Front Tag Bracket (A.Stoner style bought from Pantera)
28.Hinge Protectors in Trunk. (Pantera)
29.Kat stickers on sun visors to cover the factory label.
30.Chromed stock grille.
31.Trunk release button on passenger side to match O.E. style on driver's side. MDProwler item)
32.Mill's window regulators in both doors.
33.Dick Linneman repaired center caps. (4 ea. orig style w/rubber ring)
34.Headrest pads. (Thanks dad :thumbsup
36.Replacement secondary latches for convertible top.
37.Used Tow Hitch
38.Trailer wiring harness.
39.P.T.Cruiser Chrome Luggage rack
40.Chromed upper ball joint cover caps (Gary E.)(still in glove box )
33.Dick Linneman repaired center caps. (6 ea. new style with aluminum ring for spares)EssexExport Per the seller, this frame brace was the steel prototype. EssexExport Almost forgot the end: cat heads from Moon Equipment.
All material contained herein, Copyright 2000 - 2020