Home Page | Owners Registry | Discussion Forums | ProwlerMall | Event Scrapbooks | About |
Bottom of Page | next newest topic | next oldest topic |
Author | Topic: Need Front Inner Tie Rod |
GaryE![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() POA Site Supporter and Vendor Prowler JunkieProwler Products by Gary From:Laguna Woods, CA, USA |
![]() ![]() ![]() ![]() ![]() ![]() I am in need of new or very good used Inner Tie Rod for the Prowler. I have a customer with a bad one. Would appreciate any help. ------------------ |
alrtg![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() POA Site Supporter Prowler Junkie From:Westminster, MD, USA |
![]() ![]() ![]() ![]() ![]() ![]() Looking in the Parts Catalog, I only see one Tie Rod listed and it is listed as "Tie Rod Ends" in section 019 figures below. Figure 019-305 Tie Rod Ends Part number 4897 860AA is the TIE ROD, Steering The same number is listed in both illustrations and there appears to be no "Inner" Tie Rod End, only Outer Tie Rods but they are referred to only as a Tie Rod. With this in mind, there are two vendors currently offering this part on E-Bay. The first one http://www.ebay.com/itm/Genuine-Chrysler-Prowler-Tie-Rod-End-4897860AA-/263025412705?epid=84078663&hash=item3d3d894a61:i:263025412705&vxp=mtr has a "Buy it Now" price of $106.63 each including free shipping from Dallas Texas, and claims to have four available at the moment. The second one http://www.ebay.com/itm/steering-tie-rod-end-prowler-plymouth-chrysler-all-years-/302384224629?hash=item4667811975:g:g~IAAOSw3ydV6Y4D&vxp=mtr has a starting bid of $150.00 plus shipping of $13.91 from Troy Michigan but does not show a quantity above the one currently offered. This auction ends in two days. Both appear to be the Tie Rod by looking at the illustration on one and the part number on the other. The first seller has a 97.8% Positive feedback score with 88 sales while the second has a 100% Positive feedback score with 658 sales. Either one might meet your needs if I understand your post correctly. |
Tomcal![]() ![]() ![]() ![]() ![]() POA Site Supporter Prowler Junkie From:Commack, NY, USA |
![]() ![]() ![]() ![]() ![]() ![]() Old post with answer.... ivegotsugar I had my driver side inner tie rod replaced back in Aug 09 ... {Oops I've corrected the Phone #} Thanks Mickey ! Also the inner tie rod will be a different color than the original rod ...Its lighter in color This message has been edited by ivegotsugar on 02-11-2010 at 01:09 AM |
Tomcal![]() ![]() ![]() ![]() ![]() POA Site Supporter Prowler Junkie From:Commack, NY, USA |
![]() ![]() ![]() ![]() ![]() ![]() Inner Tie Rod End #MR519046 Available on Amazon..... http://www.amazon.com/Febest-Chrysler-Axial-Joint-Mr519046/dp/B00C6N0O32 This message has been edited by Tomcal on 07-19-2017 at 06:58 PM |
Richnew41![]() ![]() ![]() ![]() ![]() ![]() ![]() POA Site Supporter Prowler Junkie From:Wind Gap, PA |
![]() ![]() ![]() ![]() ![]() ![]() Just fantastic info!!!! Thank You Tom!!!!!!!!!!! |
Tomcal![]() ![]() ![]() ![]() ![]() POA Site Supporter Prowler Junkie From:Commack, NY, USA |
![]() ![]() ![]() ![]() ![]() ![]() Also available at Rock Auto Parts, complete with boot, zip ties, retaining clip and grease. They show complete steering rack assembly as well, although I have not researched if this rack fits our Prowlers. |
kees![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() POA Site Supporter Prowler Junkie From:Capelle, Zuid Holland, Netherlands |
![]() ![]() ![]() ![]() ![]() ![]() FYI http://www.prowleronline.com/ubb/Forum1/HTML/023022.html Kees |
GaryE![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() POA Site Supporter and Vendor Prowler JunkieProwler Products by Gary From:Laguna Woods, CA, USA |
![]() ![]() ![]() ![]() ![]() ![]() I have ordered 2. Thanks for your help. They have been discontinued by Chrysler. ------------------ |
Tomcal![]() ![]() ![]() ![]() ![]() POA Site Supporter Prowler Junkie From:Commack, NY, USA |
![]() ![]() ![]() ![]() ![]() ![]() Gary, just curious, which brand did you order? Keep us updated on how install went and quality of product. Thanks.... Tom |
NiteProwl64![]() Prowler Enthusiast From:Florida |
![]() ![]() ![]() ![]() ![]() ![]() I have always had good luck with Napa's Master Ride series... ES3607 is the number. $34.00 and works like a charm. Just saying. |
robin![]() ![]() ![]() ![]() ![]() ![]() POA Site Supporter Prowler Junkie From:St Thomas Ontario Canada |
![]() ![]() ![]() ![]() ![]() ![]() http://www.moparamerica.com/chrysler/prowler/4897860aa/2001-year/base-trim/3-5l-v6-gas-engine/steering-cat/steering-gear-and-linkage-scat/?part_name=outer-tie-rod |
Richnew41![]() ![]() ![]() ![]() ![]() ![]() ![]() POA Site Supporter Prowler Junkie From:Wind Gap, PA |
![]() ![]() ![]() ![]() ![]() ![]() I ordered the Febest as I've been impressed by there quality with other parts.... I will report back on them once received |
GaryE![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() POA Site Supporter and Vendor Prowler JunkieProwler Products by Gary From:Laguna Woods, CA, USA |
![]() ![]() ![]() ![]() ![]() ![]() Sorry to say I am back where I started. I ordered the Febest MR519046 replacement. The quality is fine but have two problems to overcome. There is not enough threads on the adjustment end of the replacement. That can be fixed by turning some more threads on the shaft. The second problem is a little more difficult to solve as the threaded end that screws into the steering box is to long. So, I am back looking to see what be out there to solve the problem. Mopar has discontinued the part. Next I am going to check out the Napa. ------------------ |
padroo![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() POA Site Supporter Prowler Junkie From:Chesterton, IN, USA |
![]() ![]() ![]() ![]() ![]() ![]() Gary, will this help? http://www.prowleronline.com/ubb/Forum1/HTML/023022.html |
ed monahan![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() POA Lifetime Site Supporter Prowler Junkie Personal ScrapBook From:Cincinnati, Oh, USA |
![]() ![]() ![]() ![]() ![]() ![]() I would bet Dick Linnemann could take care of both problems in short order. |
MDProwler![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() POA Site Supporter Prowler Junkie From:Fallston,MD USA |
![]() ![]() ![]() ![]() ![]() ![]() Pm sent Gary |
All times are CT (US) Top of Page Previous Page | ![]() |
![]() ![]() |
All material contained herein, Copyright 2000 - 2012 ProwlerOnline.com
E-Innovations, LP