Home Page | Owners Registry | Discussion Forums | ProwlerMall | Event Scrapbooks | About |
Bottom of Page | next newest topic | next oldest topic |
Author | Topic: Tire valve |
Itpurrs POA Site Supporter Prowler Junkie From:Petrolia Ontario Canada |
posted 07-13-2014 09:16 AM
My tire sensor light has been coming on and the tire pressure is good . But I noticed one of my sensor/valves is cracked, can that give me problems ? And taking off my cap 2 of the clips broke , I remember seeing something on using magnets to hold the . Can someone give me a refresher. |
jimsutton POA Site Supporter Prowler Junkie From:Ocala, FL, USA |
posted 07-13-2014 09:24 AM
Old as these Prowlers are now most likely that the battery in the sensors are bad .. |
robin POA Site Supporter Prowler Junkie From:St Thomas Ontario Canada |
posted 07-13-2014 07:23 PM
One method is this way... Send them directly to Dick Linneman. He thinks he needs me in the equation, but he doesn't need me. Dick Linneman Sterling Industries 5642 Victory Dr Cincinnati, OH 45233 Shipping is $ 10, total, for one or four caps. Repair is $ 30 for one plus $10 shipping Repair is $100 for four plus $ 10 shipping. Mark the back of them with a magic marker and he will make sure you get the same ones back. I now have 9 spares so if you lost one, we can fix you up. If you have extras, I will buy them at $ 15 each. |
beachcat BANNED From:Ontario, Canada |
posted 07-13-2014 07:36 PM
Magnet mod! Tested, proven, used by many. http://www.prowleronline.com/ubb/Forum21/HTML/000041.html |
Itpurrs POA Site Supporter Prowler Junkie From:Petrolia Ontario Canada |
posted 07-13-2014 07:47 PM
Thanks guys. What about the cracked valve stem is that going to give me a problem? |
padroo POA Site Supporter Prowler Junkie From:Chesterton, IN, USA |
posted 07-13-2014 11:06 PM
quote: I would just replace it and not worry about it. What year is your Prowler? |
ed monahan POA Lifetime Site Supporter Prowler Junkie Personal ScrapBook From:Cincinnati, Oh, USA |
posted 07-14-2014 12:47 AM
Your sensor is not visible until you take the tire off the rim. When you say your valve is cracked do you mean the valve stem CAP ? If the valve stem is cracked it is probably leaking air and I would think it would go flat within hours if not minutes. That is unless it is just a surface crack and that would not interfere with anything important. The cap screws onto the top of the valve stem. Inside of that is the actual valve, controlling the flow of air and the valve stem is about 1 1/2 inches long. The sensor is on the bottom end of that valve stem, inside the rim and tire. |
All times are CT (US) Top of Page Previous Page | Return to General Prowler Discussion next newest topic | next oldest topic |
All material contained herein, Copyright 2000 - 2012 ProwlerOnline.com
E-Innovations, LP