| Bottom of Page | next newest topic | next oldest topic |
| Author | Topic: Help ball joint |
|
Mecadoc Prowler Newbie From:Metz, Grand Est, France |
posted 11-28-2021 08:17 AM
    
Hello everyone, I really need you and your skills. Indeed, on my 2001 Prowler, I just saw that my ball joints on the front axle are split, both the top and the bottom ones. When I see the price of the ball joints, I have some for about 500 €, without the shipping costs, I live in France ..... Which is pretty much, half more .. So, a question comes to me: is it possible to only change the seal .... But now, I can't find the references of these damn seals ..... Counting on your good will Sincerely from France |
ed monahan                     POA Lifetime Site Supporter Prowler Junkie Personal ScrapBook From:Cincinnati, Oh, USA |
posted 11-28-2021 02:48 PM
quote: I presume you mean the rubber covers are split, not the ball joints themselves. |
|
Dave Haggas Prowler Junkie From:London , Hampshire , UK |
posted 11-28-2021 02:58 PM
quote: I think the term Ed, is ‘adjust’…..! This message has been edited by Dave Haggas on 11-28-2021 at 03:00 PM |
Mocar Prowler Enthusiast From:Blue Bell, PA, USA |
posted 11-28-2021 05:00 PM
Reality is you need to do 2/3rds of the work just to change the boots (seals) so you might as well change the joints if they are the OEM units. Easy way to tell if they are the aftermarket units, look to see if they have a hole in the stud for a cotter pin or a castle nut and cotter pin. P.S. Any easy way to get around the "duties" is to mark it a a warranty replacement for a defective item. |
|
ed monahan POA Lifetime Site Supporter Prowler Junkie Personal ScrapBook From:Cincinnati, Oh, USA |
posted 11-28-2021 06:06 PM
Thanks for the compliment Dave. The reality is that I have received a lot more from other owners than I have dealt out. I don't want to start naming names for fear I will forget someone BUT just today, Steve Clark dropped of a set of 4 rims that he brought back from Fla, 1000 miles away. I didn't ask him to do it, he volunteered to pick them up and drop them off on his way home. That is just one example. Most Prowler owners are very helpful and giving. We were treated like royalty when we went to the European event about 4 or 5 years ago, in Switzerland. If I can help someone over there, I certainly will. |
adacus Prowler Junkie From:houston, tx, usa |
posted 11-28-2021 08:34 PM
PM me your address overseas and I will check the shipping cost on my fed ex account |
|
Mecadoc Prowler Newbie From:Metz, Grand Est, France |
posted 11-29-2021 01:00 AM
Bonjour les amis, Avant toute chose, merci pour vos réponses... Pour Ed : en effet ce sont les joints et non les rotules qui sont fendus (heureusement d'ailleurs...) si vous avez 2 supérieurs et deux inférieurs je suis preneur. Pour Dave : en lisant votre réponse, je ne peux que répondre OUI à Ed.... Merci de ta réponse qui me conforte dans mon idée que je me faisais sur les membres du forum. Pour Mocar, c'est vrai que ta réponse est très judicieuse... Je regarderai cela le prochain WE, avec cette épidémie mes journées sont chargées.... Pour Adacus: je t'envoie mes coordonnées par mail ce soir... Maintenant je pars au travail... Encore un grand merci à tous |
stevedymo POA Site Supporter Prowler Junkie Personal ScrapBook From:Brick, NJ, USA |
posted 11-29-2021 07:04 AM
Above Translated: Hello friends, First of all, thank you for your answers ... For Ed: indeed it is the joints and not the ball joints which are split (luckily, moreover ...) if you have 2 upper and two lower I am taker. For Dave: by reading your answer, I can only answer YES to Ed .... Thank you for your answer which consolidates me in my idea that I made myself on the members of the forum. For Mocar, it is true that your answer is very judicious ... I will look at it the next WE, with this epidemic my days are busy .... For Adacus: I'm sending you my details by email tonight ... Now I'm off to work ... Again a big thank you to all |
|
Mecadoc Prowler Newbie From:Metz, Grand Est, France |
posted 11-29-2021 02:57 PM
Thanks Steve Dino. Oops .... I forgot to start "Google traductor". I found it very strange that I understood the first time ..... I really have to keep taking my drops .... |
|
ed monahan POA Lifetime Site Supporter Prowler Junkie Personal ScrapBook From:Cincinnati, Oh, USA |
posted 11-29-2021 04:35 PM
Long story, hang in there. I can't find my lowers but I definitely have some and will locate them. Looked online. JEGS said the Uppers RP13874A would ship directly to me from RARE PARTS on Dec. 8th. I was afraid we would be gone before they got here so I didn't order them. I can order them later in Fla. So I called Rare Parts 800 621 2005. Neither are in stock but the guy told me they will be added to the list tomorrow. He thanked me for bringing the problem to his attention. He appologized for them being out of stock, twice. Lower is RP13768A Mecadoc let me know if you cannot get them shipped directly to you or if you want me to order them for you and have them shipped to me in Fla and then I can ship them to you in France. I don't have the current price, of course. You can look at the Rare Parrs website to see the price in a few weeks. I won't mark them up. You will pay whatever they cost plus the shipping. Sorry it isn't working more quickly but it looks like there is hope on the horizon. Also, let me know if you want the lowers right away. I will find them and ship them but if you are going to wait and do them all at the same time, there is no need for two shipments. |
|
Mecadoc Prowler Newbie From:Metz, Grand Est, France |
posted 11-30-2021 10:24 AM
Hello Ed, I wouldn't want to abuse your kindness, but I think the easiest way is to send me all 4 at the same time. I'm not a few weeks away ... here the weather is starting to deteriorate with its share of ice and unsafe roads ... the machine stays warm in its garage. Once you have them, you can contact me to see how we are organized. Best regards |
jwallis POA Site Supporter Prowler Junkie From:JOHNSONBURG, PA., USA. |
posted 11-30-2021 11:33 AM
Ed thay say that the lower are available here https://fcrcmachine.com/rare-parts-front-lower-ball-joint-1997-2002-plymouth-chrysler-prowler-13768/ |
Greg and Veta POA Site Supporter Prowler Junkie From:Naples, Florida, United States |
posted 11-30-2021 12:13 PM
quote: Jeff, I tried ordering from them as soon as we got back from West Virginia but never got any response or any ball joints from them. I was lucky to find Rare Parts lowers on ebay. I believe Jim Sutton knows the replacement part if someone just wanted to replace the boot, but if I were going to all the effort to do that I would just replace with a new joint and have peace of mind. Oh, if all else fails the Prowler Store apparently sells both upper and lower joints, and ships to Europe. |
|
Mecadoc Prowler Newbie From:Metz, Grand Est, France |
posted 11-30-2021 02:22 PM
I admit to being surprised by the price reduction from $ 225 to $ 88 ...... That appeals to me .... It is true that we find some at "Prowler Store", but with what I read on the forum, I have some reservations .. Being on the other side of the Atlantic, new to the forum and not knowing all the suppliers, that's why I turn to your benevolence |
|
ed monahan POA Lifetime Site Supporter Prowler Junkie Personal ScrapBook From:Cincinnati, Oh, USA |
posted 11-30-2021 07:24 PM
Avoid the Prowler Store at all costs. They do not PRODUCE anything, just steal other peoples' ideas and designs and double or triple the price and sell them to the unsuspecting. If something goes wrong, it is usually YOUR fault, not theirs. This message has been edited by ed monahan on 11-30-2021 at 08:11 PM |
|
ed monahan POA Lifetime Site Supporter Prowler Junkie Personal ScrapBook From:Cincinnati, Oh, USA |
posted 11-30-2021 08:11 PM
I haven't found my ball joints yet. Sometimes Sandy cleans up after me and hides things. lol |
|
Mecadoc Prowler Newbie From:Metz, Grand Est, France |
posted 12-01-2021 12:54 AM
For Ed: message received loud and clear. I would wait until Rare Parts evening was delivered. As for your last message, don't worry, I have the same one at home .... |
|
ed monahan POA Lifetime Site Supporter Prowler Junkie Personal ScrapBook From:Cincinnati, Oh, USA |
posted 12-01-2021 05:57 AM
Got it. We will take care of it in about a month. |
|
Mecadoc Prowler Newbie From:Metz, Grand Est, France |
posted 12-01-2021 03:05 PM
OK no problem. What a month in a lifetime ..... I saw the Rare Parts website, I think I would also take SWAY BAR LINK Kit. Is it a good idea ? Maybe not to assemble it right away but keep it just in case .... |
wicka2323 POA Site Supporter Prowler Junkie From:Middleboro , Mass, USA |
posted 12-02-2021 04:14 PM
Ed I have a pair if you need them we can replace them when they become in stock |
|
ed monahan POA Lifetime Site Supporter Prowler Junkie Personal ScrapBook From:Cincinnati, Oh, USA |
posted 12-02-2021 06:18 PM
Mecadoc needs them in France. Let's see what he has to say. Thank you. |
|
starvoyager POA Site Supporter Prowler Junkie From:Reno, NV, USA |
posted 12-02-2021 09:14 PM
Ed, you mention the lower ball joint part number as RP13768A. When you talked to Rare Parts did they say anything about a new more improved version, hence the part number with an "A" at the end? I see the part number listed elsewhere as RP13768. FCRC Machine lists the Rare Parts # as RP13768
|
|
ed monahan POA Lifetime Site Supporter Prowler Junkie Personal ScrapBook From:Cincinnati, Oh, USA |
posted 12-02-2021 09:44 PM
There has always been an A after the number. You can do a search and look at threads from a couple of years ago.
They don't have the PR on the number either. The date on that package is from 2019. This message has been edited by ed monahan on 12-02-2021 at 10:03 PM |
|
Mecadoc Prowler Newbie From:Metz, Grand Est, France |
posted 12-03-2021 02:35 PM
I see that we are progressing well. Only the superiors are missing. Whether the ball joints come from Wicka2323 or Rare Parts, it doesn't matter to me, as long as they are operational ... As I said earlier, I'm not in too much of a hurry. |
|
Mecadoc Prowler Newbie From:Metz, Grand Est, France |
posted 12-05-2021 04:34 AM
Error: it should read "annoy as few people as possible" Oupsssss |
All times are CT (US) Top of Page Previous Page |  Return to General Prowler Discussion next newest topic | next oldest topic |
  |
|
Contact Us | Prowler Online Homepage
All material contained herein, Copyright 2000 - 2020
