| Prowler-Parts.Com | Prowler Products By Gary | Tom Mills / Jefferson Auto | Prowler-Products Trunks |
 |
 |
 |
 |
| Home Page | Owners Registry | Discussion Forums | ProwlerMall | Event Scrapbooks | About |
| Prowler-Parts.Com | Prowler Products By Gary | Tom Mills / Jefferson Auto | Prowler-Products Trunks |
|
|
|
|
 Click here to return to the Prowler Online Board Main Page |
 ProwlerOnline, Plymouth/Chrysler Prowler Discussion Forum
 Prowler Performance/Appearance Discussion
 Chalky buildup on front suspension
|
| Bottom of Page | next newest topic | next oldest topic |
| Author | Topic: Chalky buildup on front suspension |
fortsmith Prowler Junkie From:TITUSVILLE |
posted 10-04-2008 05:41 AM
    
As I look at my front susp, there is a while chalky buildup UNDER the clear coat. How can I get rid of that and seal the metal to keep it from returning???? |
JohnC   POA Site Supporter Prowler Junkie From:Kechi, KS 67067 |
posted 10-04-2008 12:58 PM
The chalky build-up is aluminum corrosion. Left untreated, pits will begin to form in the alumnium. It's possible that the clear coat has small cracks in it that have allowed moisture to get in underneath, allowing the corrosion to form. Unfortunately, I'm not sure how you're going to be able to resolve it without removing the clearcoat. |
MDProwler       POA Site Supporter Prowler Junkie From:Fallston,MD USA |
posted 10-05-2008 09:26 AM
Dave Mills had this problem and had them repainted. You need to ask him for the details of what he did. |
|
fortsmith Prowler Junkie From:TITUSVILLE |
posted 10-05-2008 11:42 AM
Thanks. |
|
Dave Haggas Prowler Junkie From:united kingdom |
posted 10-10-2008 03:14 PM
I removed the arms from my car,ground away the casting/forging flashing that is all around the arms. I then paintstripped the clearcoat,then had the arms shot-blasted. The arms were then treated to a coat of clear-laquer that is designed for bare aluminium. The arms look better than new with the bonus of no casting edges. Look is stock with a twist.... |
|
JohnC POA Site Supporter Prowler Junkie From:Kechi, KS 67067 |
posted 10-10-2008 10:31 PM
Dave, Got any pictures of that suspension you'd be willing to share? |
|
Dave Haggas Prowler Junkie From:united kingdom |
posted 10-12-2008 05:03 PM
Hi John, if you send me your e-mail address I can then send some to you. This is because I havent worked out how to post pics. When you get them you can post them here for all to see if you wish. I will be away from here for 2 weeks,so if you dont receive tomorrow,please remind me ! This message has been edited by Dave Haggas on 10-12-2008 at 05:04 PM |
|
JohnC POA Site Supporter Prowler Junkie From:Kechi, KS 67067 |
posted 11-08-2008 08:45 AM
Here's some pics of Dave Haggas' front supension. Looks very nice. I might have to consider doing something like that to my car.
|
EdsCat       POA Site Supporter Prowler Junkie From:Green Cove Springs, Florida, USA |
posted 11-08-2008 04:49 PM
That is a great looking front end. I suspect it did not cost $2,000+ to do it either, right? What was the total cost? Very nice...  ------------------ This message has been edited by EdsUp on 11-08-2008 at 04:50 PM |
|
Dave Haggas Prowler Junkie From:united kingdom |
posted 11-10-2008 08:59 AM
Thanks guys for your kind words. I must admit I hate dirty looking cars.The front end on mine prior to me stripping it was pretty dirty, especially the hub/uprights. The costs involved were small.All the labour was my own with the exception of the grit blasting and the clear-coat to the arms. Removing the casting marks from the wishbones and also from the upright was very labour intensive.With the upright and wishbones clearcoated, maintaining a clean finish is very easy. All nuts were replaced by stainless nylocs.I may just do the same to the rear end now.... |
All times are CT (US) Top of Page Previous Page | Return to Prowler Performance/Appearance Discussion next newest topic | next oldest topic |
  |
|
All material contained herein, Copyright 2000 - 2012 ProwlerOnline.com
E-Innovations, LP
