Archive: Difference with new ball joints - ProwlerOnline, Plymouth/Chrysler Prowler Discussion Forum

Note: This is an archived topic. It is read-only.

Difference with new ball joints (Page 2)

This topic is 2 pages long: 1 2
This topic was originally posted in this forum: Political Off Topic

Author	Topic: Difference with new ball joints
BeWare Prowler Junkie Posts: 18511 From: Acworth,GA,USA Registered: JUL 2000	posted 04-04-2003 09:01 PM I got to drive my Kat at speed on the interstate today (up to 80 mph). Previously I had allot of vibration in my steering column. It's all but gone. Now my Kat may have needed alignment, but if my memory serves me, I have always had allot of column vibration from day one. This is not my imagination at work.
butchcee Prowler Junkie Posts: 7476 From: Lake Ariel, Pa. Registered: SEP 2000	posted 04-05-2003 04:39 PM did they do an allignment?--on warranty? This message has been edited by butchcee on 04-05-2003 at 04:46 PM
ed monahan Prowler Junkie Posts: 33595 From: Cincinnati, OH Registered: JUL 2000	posted 04-05-2003 07:50 PM Not on mine. Mine was up over 100 several times today and it tracks just fine.
Buckaneer Prowler Junkie Posts: 91 From: Washington C.H., Ohio Registered: JAN 2003	posted 04-05-2003 08:01 PM I didn't get an alignment when they replaced mine either. It seams to steer easier then it did and tracks fine. I notice however, it still does not come back to center when I turn the wheel. Never did since new. 900 miles. I like the ceramic brake pads too!
BeWare Prowler Junkie Posts: 18511 From: Acworth,GA,USA Registered: JUL 2000	posted 04-05-2003 09:13 PM I am really not sure if they did alignment. I just assumed it would have been. I guess I should ask.

This topic is 2 pages long: 1 2 All times are CT (US)	This is an ARCHIVED topic. You may not reply to it!

	Hop to:

Contact Us | Prowler Online Homepage

All material contained herein, Copyright 2000 - 2012 ProwlerOnline.com
E-Innovations, LP