Archive: Are they bad or...... - ProwlerOnline, Plymouth/Chrysler Prowler Discussion Forum

Note: This is an archived topic. It is read-only.

Are they bad or...... (Page 2)

This topic is 2 pages long: 1 2
This topic was originally posted in this forum: Political Off Topic

Author	Topic: Are they bad or......
CAT-A-TONIC Prowler Junkie Posts: 71 From: SAN JOSE,CA. Registered: APR 2001	posted 04-30-2003 11:29 AM Has anyone that has had their ball joints replaced, with the boots still intact, examined the old joints and found them bad or greaseless or anything else that might indicate that they were on there way to failing? Seems like all the ones that have failed have had cracked boots letting outside dirt enter.
Prowler Prowler Junkie Posts: 745 From: Erhard, MN Registered: JUN 2002	posted 04-30-2003 03:14 PM My old joints were clean as a whistle and full of goo. Kat's ball joints were like that too!
Dave Mills Prowler Junkie Posts: 5419 From: Johnstown, PA, USA Registered: JUL 2000	posted 04-30-2003 05:13 PM My joints looked fine and the boots were not torn (on the car that is)
Laddie Roussel Prowler Junkie Posts: 3463 From: Hester, LA. USA Registered: JUL 2000	posted 04-30-2003 07:08 PM The replaced joints were OK.
purplecat Prowler Junkie Posts: 583 From: Texas Hill Country Registered: DEC 2001	posted 04-30-2003 07:37 PM The joints without the broken boots (1st Kat) were fine, the other Kat had broken boots, steering was tight and the joints were tight.
dpena Administrating Kat Posts: 5359 From: San Jose Ca Santa Clara Registered: JUL 2000	posted 04-30-2003 08:03 PM Mine were just fine...

This topic is 2 pages long: 1 2 All times are CT (US)	This is an ARCHIVED topic. You may not reply to it!

	Hop to:

Contact Us | Prowler Online Homepage

All material contained herein, Copyright 2000 - 2012 ProwlerOnline.com
E-Innovations, LP