Archive: Ball joint question? - ProwlerOnline, Plymouth/Chrysler Prowler Discussion Forum

Note: This is an archived topic. It is read-only.

Ball joint question?

This topic was originally posted in this forum: Political Off Topic

Author	Topic: Ball joint question?
yazz Prowler Junkie Posts: 121 From: Plano, TX, USA Registered: JUN 2001	posted 05-22-2003 11:37 PM Ok, Had my joints replaced but is there supposed to be a plastic or rubber ring between the top nut and the joint? If there is I am missing it now. May require another trip to the dealer....argh. Yazz
idive Prowler Junkie Posts: 8483 From: Texas USA Registered: APR 2003	posted 05-23-2003 12:14 AM If you are talking about the ring around the top end of the lower arm where the ball joint comes thru, there is no ring that goes there. (Did that make any sense?)
yazz Prowler Junkie Posts: 121 From: Plano, TX, USA Registered: JUN 2001	posted 05-23-2003 10:51 AM yes, that did make sense. From seeing a few pics of the joint replacement there does seem to be a ring. Maybe I am mistaken.

All times are CT (US)	This is an ARCHIVED topic. You may not reply to it!

	Hop to:

Contact Us | Prowler Online Homepage

All material contained herein, Copyright 2000 - 2012 ProwlerOnline.com
E-Innovations, LP