Author
|
Topic: Tool finally in!
|
Randy Cobb Prowler Junkie Posts: 4070 From: Greensboro, NC Registered: JUL 2002
|
posted 08-06-2003 11:48 AM
The tool is FINALLY in at our local dealer!I have appointment tomorrow for the recall work to be done. The Prowler/Viper tech has not done one. I told him that several of you guys have done the work and that some pixs/comments/pointers have been posted. He is not one of these kind of "know-it-all" types. He has asked me to get any info I can to assist him, be it written or even a telephone number of techs who are experienced at this job. I think I remember a thread(s) explaining in detail the process, but wasn't able to find it. PLEASE, PLEASE advise me as to this thread and the number of qualified tech(s) experienced in this recall. THANKS IN ADVANCE! ------------------
|
Randy Cobb Prowler Junkie Posts: 4070 From: Greensboro, NC Registered: JUL 2002
|
posted 08-06-2003 11:56 AM
After my above post I found Laddie Roussel's post of 4/22/03. That one is great any others I should get?------------------
|
idive Prowler Junkie Posts: 8483 From: Texas USA Registered: APR 2003
|
posted 08-06-2003 01:20 PM
Do a search for posts on this by cmblockhus. He did some at his place during an "open house" kinda deal. Many pics of it were taken. There's another thread stating to remove the ring clips holding the boot on BEFORE removing the ball joint. This makes it much easier, faster, and minimizes chances for any damage. Make sure he is aware that the upper ball joint torque specs were revised to 65 ft lbs from 95 ft lbs. Good luck.------------------ Mickey 1997 Plymouth Prowler #156 Custom car cover Mopar front splash guards Real Rod stainless steel transmission cooler cover Mopar Trailer hitch and harness Real Rod weekender 1992 Plymouth Grand Voyager SE Longhorn scratches Boomerschlobber
|
ed monahan Prowler Junkie Posts: 33595 From: Cincinnati, OH Registered: JUL 2000
|
posted 08-20-2003 12:05 AM
Are we allowing this type of language on this site now??? The title of the thread, I mean.
|
Mike Krehel Administrating Kat Posts: 3047 From: United States Registered: JUL 2000
|
posted 08-20-2003 12:22 AM
LOL!
|
ALLEY CAT Prowler Junkie Posts: 36093 From: Mesa, Az Registered: JUL 2000
|
posted 08-20-2003 08:10 AM
Randy - I think Ed and Mike are making fun of you?
|
Randy Cobb Prowler Junkie Posts: 4070 From: Greensboro, NC Registered: JUL 2002
|
posted 08-20-2003 07:48 PM
AC - I can see why!Wish I could say the tool was a sledge hammer instead of a tac hammer! ------------------
|
ed monahan Prowler Junkie Posts: 33595 From: Cincinnati, OH Registered: JUL 2000
|
posted 08-20-2003 11:18 PM
Try as I might, I just can't slide one past Sasquatch. He is just too sharp, and that is how he landed the job of head janitor at the K M. lol. Randy, don't take it personal. Mike K makes fun of everyone. lol
|
Randy Cobb Prowler Junkie Posts: 4070 From: Greensboro, NC Registered: JUL 2002
|
posted 08-21-2003 11:31 AM
Ed:Take it personal; heck no, I take it as a complement! I figure if I'm catching the grief some other poor soul with thin skin is safe for the time being. ------------------
|