Home Page | Owners Registry | Discussion Forums | ProwlerMall | Event Scrapbooks | About |
Bottom of Page | next newest topic | next oldest topic |
Author | Topic: Wheel Centers |
Greg Shaffer Prowler Newbie Personal ScrapBook From:Bedford, PA, USA |
posted 10-14-2000 03:36 PM
I put ceramic brake pads on today. Front wheels were loose and so were the brake calibers. So I decided to check rear wheels and calibers to find that they were also loose. Two wheel centers broke the tabs off taking them off and the other two broke putting them back on. I don't mean all the tabs but at least one tab broke on each wheel center either putting them on or taking them off they were plastic. Very bad design. Did anyone else have problems with their center tabs. |
butchcee POA Site Supporter Prowler Junkie From:Lake Ariel, Pa. |
posted 10-14-2000 03:53 PM
Greg-check past posts for info on this. A lot of people had problems with them. |
MidlifeProwler Prowler Junkie From:Silver Spring, Maryland USA |
posted 10-14-2000 05:06 PM
Greg, I had the same problem and I got a new pair under warranty from Chrysler. They are very cheaply made and I agree. I've learn to remove them by using 2 wooden sticks and pulling straight towards you, not at an angle. Reinstall them by aligning the clips on the center caps with the slots on the wheel and push in with both hands. This worked for me. |
Gary C POA Site Supporter Prowler Junkie Personal ScrapBook From:San Diego Area |
posted 10-14-2000 06:43 PM
Greg, let me be the first to Welcome you to Prowleronline. It has been great talking to you on the Live Voice Chat room the last couple of days. Try what we where talking about with the dealer. Welcome and enjoy. |
j paulsen Prowler Enthusiast From:Columbus, ohio usa |
posted 10-14-2000 07:48 PM
Greg, had all four replaced under warranty a month or so ago, I am sure that chrysler knows that they are junk and they should come up with a cap that can hold up to being put back on the vehicle more than once. Search the archives and you will see that others have re-enforced their caps with some type of epoxy compound which I will probably do very soon! Good luck and just understand that they are cars and made by humans and that means that everything cannot be perfect! |
All times are CT (US) Top of Page Previous Page | Return to General Prowler Discussion next newest topic | next oldest topic |
All material contained herein, Copyright 2000 - 2012 ProwlerOnline.com
E-Innovations, LP