Home Page | Owners Registry | Discussion Forums | ProwlerMall | Event Scrapbooks | About |
Prowler Products By Gary | Tom Mills / Jefferson Auto |
Bottom of Page | next newest topic | next oldest topic |
Author | Topic: torque converter..HELP!!!!!!! |
2kprwlr Prowler Enthusiast From:Dallas, Texas, USA |
posted 09-09-2003 01:40 PM
PLEASE>>>I need some advice. I have posted a string on this problem recently. To review, please go to http://www.prowleronline.com/ubb/Forum2/HTML/001305.html After some good input from several people, it came down to what sounded like a torque converter problem. I took the kat back in yesterday (9-8-03). The tech called me today and told me he felt sure it was the converter. He called DC and was told "not to touch it." They said the vibration I was feeling was "normal" and that even though it only started recently, that there was nothing they could do. My tech asked if they could just replace the converter...they still said "no!" According to my tech, the Prowler is one of the only cars he knows of that does not have the torque converter disengage when you take your foot off the gas. He is trying to see if there is a way to bypass that part of the program and let it disengage on decel. We have not tried balancing the drive shaft, but my tech does not think this is the problem. Also have not done high speed balancing of the wheels. He is going to check the up and down shift solenoids on the tranny today, but said if they were bad, it would go in to limp mode. CJ, MIKE KREHL, NEAL...anyone!!! Please send your advice. I think I'm getting screwed here. I told the tech (and he agreed) that DC won't acknowledge a problem until a certain number of people experience it. Statistically, there are not enough Prowlers on the road to make any problems really stand out until almost all of us feel them. Grant ------------------ |
jd2ksilver POA Site Supporter Prowler Junkie Personal ScrapBook From:Mt. View, CA |
posted 09-09-2003 05:13 PM
Hmmm I'd ask for the paper that said not to touch it. If he can produce it, then I think you may have something. My guess is he can't.
------------------ |
neal POA Site Supporter DC Certified Prowler Tech From:dallas,tex. u.s.a. |
posted 09-09-2003 06:28 PM
I test drive prowlers all the time.this car has no vibration or shutter on decel at any speed.this is not a normal condition.if this is a normal condition all would have it.you may have to get another prowler owner to help out with a test drive at the dealer.they don't know what the problem is now they have got Chrysler involved.your car is still under warranty right. have them fix it.they are afraid to make a repair for fear it may be wrong and get backcharged from chrysler.let me know what happens |
ALLEY CAT POA Lifetime Site Supporter Prowler Junkie From:mesa, az, USA |
posted 09-09-2003 06:55 PM
neal - Once again, thanks for stepping up with an honest opinion. Grant - It's time to take the bull by the horns. Keep us posted. |
2kprwlr Prowler Enthusiast From:Dallas, Texas, USA |
posted 09-10-2003 12:22 PM
My tech said he was willing to "fudge" things for me and find a way where he just has to replace the torque converter. I had him wait as I was hoping to find out how others had it repaired and got it covered. I am still under warranty (I have the full extended). ------------------ |
2kprwlr Prowler Enthusiast From:Dallas, Texas, USA |
posted 09-10-2003 12:32 PM
Hi, Just spoke with the dealer (friend) who sold me the car. He and his brother also have a prowler and he agreed it was bulls--t. He said to just have the tech replace the converter and if problem still present then start diging. Grant ------------------ |
2kprwlr Prowler Enthusiast From:Dallas, Texas, USA |
posted 09-10-2003 03:50 PM
Just spoke with my prowler tech...he says he took it out for a drive and thought that the vibration was getting even worse so they have ordered a new torque converter. It will take a week to get the part in. I hope this fixes it. I'll keep eveyone posted. I know how much I have learned from other's troubles. Grant ------------------ |
All times are CT (US) Top of Page Previous Page | Return to Technical Questions & Answers next newest topic | next oldest topic |
All material contained herein, Copyright 2000 - 2012 ProwlerOnline.com
E-Innovations, LP