Home Page | Owners Registry | Discussion Forums | ProwlerMall | Event Scrapbooks | About |
Prowler Products By Gary | Tom Mills / Jefferson Auto |
![]() |
![]() |
Bottom of Page This topic is 2 pages long: 1 2 |
next newest topic | next oldest topic |
Author | Topic: Mudflap Bracket |
SirReal![]() ![]() ![]() ![]() ![]() POA Site Supporter Prowler Junkie From:Burtonsville,Md Good ole U.S.A |
![]() ![]() ![]() ![]() ![]() ![]() For those that might have missed my reply to another mudflap bracket topic, I found a fabricator that made a replacement for me. It is the same shape as the original and has the same bend. The only difference is the three studs for the mudflap are welded to the bracket. He charged me $15 a piece, which is better then buying a new fender. ![]() I didn't put this in the classifieds as I am doing this as a thank you for all that I have received here. If you are going to Woodward and need one they are $15 and I'll bring them with me. I won't be bringing extras so if you need one pls let me know so I can have the exact amount made. To the folks that pm'd me from the other topic, those brackets will be mailed out tomorrow. tuib and RPL yours are at the top of the list for Woodward delivery. Thanks again Bob Miller for allowing me to use your perfect bracket as a template. |
BeWare![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() POA Site Supporter Prowler Junkie From:Acworth , Georgia , USA |
![]() ![]() ![]() ![]() ![]() ![]() I will take two |
Howard![]() ![]() ![]() ![]() ![]() ![]() POA Site Supporter Prowler Junkie From:Valencia, CA, USA |
![]() ![]() ![]() ![]() ![]() ![]() This is a top quality product. |
mikee![]() ![]() ![]() ![]() ![]() ![]() ![]() POA Site Supporter Prowler Junkie From:California |
![]() ![]() ![]() ![]() ![]() ![]() Great product. I now have the use of my mud flaps again. Thanks Sir Real. Your brackets work great and the price can not be beat. Mike |
Joseph Mark![]() ![]() POA Site Supporter Prowler Junkie From:Vancouver,British Columbia,Canada |
![]() ![]() ![]() ![]() ![]() ![]() Hi SirReal, Just send you an e-mail wanting two brackets, too. Thanks, Joseph ------------------ |
SuperKat![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() POA Site Supporter Prowler Junkie From:Atlanta, Georgia, USA |
![]() ![]() ![]() ![]() ![]() ![]() I'd like two. Thanks for making these. Gordon Karns |
joe cat![]() Prowler Junkie From:Lancaster, Pa, USA |
![]() ![]() ![]() ![]() ![]() ![]() What the heck is a mud flap bracket??? Why do we want them?? Whats the benefit? And when can it get to my house??? Joe Cat- Email joe@fcgerlach.com Thank you!!! |
ETMIDZT![]() ![]() ![]() ![]() ![]() ![]() POA Site Supporter Prowler Junkie From:Spring Lake, Mi. USA |
![]() ![]() ![]() ![]() ![]() ![]() Lets see a pic, if you have one. |
firecat![]() ![]() ![]() ![]() ![]() ![]() POA Site Supporter Prowler Junkie From:East Peoria, IL. USA |
![]() ![]() ![]() ![]() ![]() ![]() SirReal, I would like two (2) brackets. We will be at Woodward, I will look you up there. Thanks Gene Snyder East Peoria, Illinois (FireCat) |
ed monahan![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() POA Lifetime Site Supporter Prowler Junkie Personal ScrapBook From:Cincinnati, Oh, USA |
![]() ![]() ![]() ![]() ![]() ![]() The mud flap bracket is on the front fenders. It holds the front mud flaps. The front mud flaps help prevent dings and dirt getting thrown down the side of the car. If you back up and get the mud flap caught between the back of a pot hole and the tire, it will pull the fender down. The bracket was not sold separately from D-C. You had to replace the entire fender. This is not a new mod. The cars came with the bracket attached and a lot of dealers went ahead and installed the mud flaps. If you don't have them, you really should get them. |
ETMIDZT![]() ![]() ![]() ![]() ![]() ![]() POA Site Supporter Prowler Junkie From:Spring Lake, Mi. USA |
![]() ![]() ![]() ![]() ![]() ![]() I'll take two. See you at Woodward. |
Joseph Mark![]() ![]() POA Site Supporter Prowler Junkie From:Vancouver,British Columbia,Canada |
![]() ![]() ![]() ![]() ![]() ![]() Hi SirReal, Haven't from you yet? Just want to make sure you got the message.
Joseph ------------------ |
SirReal![]() ![]() ![]() ![]() ![]() POA Site Supporter Prowler Junkie From:Burtonsville,Md Good ole U.S.A |
![]() ![]() ![]() ![]() ![]() ![]() Ed thanks for the assist ![]() All PM's have been answered and all that requested on this topic are on the list for Woodward. Come on Woodward This message has been edited by SirReal on 07-12-2007 at 08:09 PM |
dan lawrence![]() Prowler Junkie From:sidney,ohio,usa |
![]() ![]() ![]() ![]() ![]() ![]() SENT YOU A PRIVATE MESSAGE BUT WANTED TO MAKE SURE YOU GOT IT I WILL TAKE 2 AND HOW DO I CONTACT YOU AT WOODWARD THANKS DAN LAWRENCE |
garysss![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() POA Site Supporter Prowler Junkie From:Balto. Md. |
![]() ![]() ![]() ![]() ![]() ![]() Jeff will contact you in the evening. No computer access during the day. |
Rick Buehler![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() POA Site Supporter Prowler Junkie From:St.louis,mo. USA |
![]() ![]() ![]() ![]() ![]() ![]() I'll take two. See you at Woodward. Thank, |
99prowler99 Prowler Junkie From:Fountain Valley Ca USA |
![]() ![]() ![]() ![]() ![]() ![]() My question is how do you attatch it to the fender? The one on my left completely broke off so there is no where to attatch the new bracket is there? This message has been edited by 99prowler99 on 07-24-2007 at 08:19 PM |
SirReal![]() ![]() ![]() ![]() ![]() POA Site Supporter Prowler Junkie From:Burtonsville,Md Good ole U.S.A |
![]() ![]() ![]() ![]() ![]() ![]() The bracket has to be bonded back on. I suggest using Marine-Tex. It's a two part epoxy that is available at any boat store. The small box is all you need. You have to sand the area where the old bracket came off and then wipe it with Acetone. Then mix the Marine-Tex together and apply it to the sanded area and lineup the bracket. It should be clamped, using three spring clamps (one on each bolt) for maximum bonding. Let it cure for 24 hrs and you are ready to go. |
SirReal![]() ![]() ![]() ![]() ![]() POA Site Supporter Prowler Junkie From:Burtonsville,Md Good ole U.S.A |
![]() ![]() ![]() ![]() ![]() ![]() I have to cutoff taking any more orders until after Woodward. Everyone that has ordered one here or through PM will be taken care of. The fabricator that I use just took on a huge project and I don't want to overwhelm him. 99prowler99 if you want one let me know. That will be the last order until after Woodward. Jeff |
99prowler99 Prowler Junkie From:Fountain Valley Ca USA |
![]() ![]() ![]() ![]() ![]() ![]() I would like one sireal. Sorrry so late replying, I just got back from vacation. If I need to wait, I understand due to the delay gettting back to you. Just let me know. |
wbrown Prowler Newbie From:Rochester Hills,Mi. USA |
![]() ![]() ![]() ![]() ![]() ![]() I could use two,how could I find you during the cruise week. Wayne Brown |
ed monahan![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() POA Lifetime Site Supporter Prowler Junkie Personal ScrapBook From:Cincinnati, Oh, USA |
![]() ![]() ![]() ![]() ![]() ![]() Wayne, just ask someone who he is. They will help point him out for you. |
ed monahan![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() POA Lifetime Site Supporter Prowler Junkie Personal ScrapBook From:Cincinnati, Oh, USA |
![]() ![]() ![]() ![]() ![]() ![]() ![]() Here is a picture of Jeff so you can recognize him. lol |
ed monahan![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() POA Lifetime Site Supporter Prowler Junkie Personal ScrapBook From:Cincinnati, Oh, USA |
![]() ![]() ![]() ![]() ![]() ![]() ![]() That is Jeff with the yellow hat on. |
GenoTex![]() ![]() ![]() ![]() ![]() ![]() POA Site Supporter Prowler Junkie Personal ScrapBook From:Oakfield, WI, USA |
![]() ![]() ![]() ![]() ![]() ![]() the good lookin' one ![]() |
This topic is 2 pages long: 1 2 All times are CT (US) Top of Page Previous Page | ![]() |
![]() ![]() |
All material contained herein, Copyright 2000 - 2012 ProwlerOnline.com
E-Innovations, LP