Home Page | Owners Registry | Discussion Forums | ProwlerMall | Event Scrapbooks | About |
Prowler Products By Gary | Tom Mills / Jefferson Auto |
Click here to return to the Prowler Online Board Main Page Topic Closed |
ProwlerOnline, Plymouth/Chrysler Prowler Discussion Forum
Technical Questions & Answers Inner Tie Rod Replacement
|
This topic has been transferred to: Prowler Reproduction Parts Discussion |
next newest topic | next oldest topic |
Author | Topic: Inner Tie Rod Replacement |
Niles357 Prowler Enthusiast From:Riviera Beach |
posted 02-05-2010 07:52 PM
Has anyone had to replace an inner tie rod before; and if so, was it a pain or fairly easy? |
catfish POA Site Supporter Prowler Junkie From:scottsdale,az,usa |
posted 02-05-2010 09:22 PM
i believe the inner tie rod cannot be purchased seperatly,its part of the steering rack. ------------------ |
idive POA Site Supporter Prowler Junkie From:Texas USA |
posted 02-06-2010 01:21 AM
By inner tie rod, what are you talking about? I may have a match for you. But if it was damaged from dealer failure to perform the recall on the new arm when installing, get the whole rack new at dealer expense. This message has been edited by idive on 02-06-2010 at 01:23 AM |
Niles357 Prowler Enthusiast From:Riviera Beach |
posted 02-09-2010 09:11 AM
The inner tie rod extends from the bellows at the ends of the rack. The one on the drivers side has play in it. I've been searching for just the inner tie rod but it appears that I'll have to buy the whole rack. |
MDProwler POA Site Supporter Prowler Junkie From:Fallston,MD USA |
posted 02-09-2010 10:50 AM
The inner part just screws into the rack. There is no part to create play. It's either loose or the rack is the problem. Anyone with a chrome front end had to remove this part for chroming. Pull the boot away and hold the ball joint end behind the boot with channel locks and then you can unscrew the rod. Check with Gary Empfield for details. gary@prowlerproducts.com |
idive POA Site Supporter Prowler Junkie From:Texas USA |
posted 02-09-2010 06:02 PM
quote: There is a replacement part from another vehicle out there that will work. I'll have to see if I can find my info on what it's from. If you want the one from a Prowler, you will have to buy the whole rack. |
catfish POA Site Supporter Prowler Junkie From:scottsdale,az,usa |
posted 02-09-2010 06:37 PM
niles,whats wrong with yours.all chrysler rack and pinions come with the inner rods,part of the rack.i seem to remember somebody asking the same question awhile back.you can call adealer and see if theres another rack that will fit a prowler,i dontthink there is.you can buy the tie rod end maybe,but not the inner.had a wrecked 300c,that rack also came with the inners on it also. ------------------ This message has been edited by catfish on 02-09-2010 at 06:42 PM |
Niles357 Prowler Enthusiast From:Riviera Beach |
posted 02-09-2010 08:55 PM
I've been trying to avoid the dealer cost. ($1300+) Tomorrow I'll pull the boot and take a closer look to see if it's the Tie rod or the rack. I did find a re-manufactured rack from Rack&Pinion Warehouse for 179 + Core. |
catfish POA Site Supporter Prowler Junkie From:scottsdale,az,usa |
posted 02-09-2010 09:20 PM
if you have to go with the reman rack.let us know what happens.ive never heard of a prowler reman rack. ------------------ |
David Veu Casovic POA Site Supporter Prowler Junkie From:PIQUA, Ohio |
posted 02-09-2010 09:47 PM
http://www.jorgenauto.com/rack-pinion/plymouth.html http://frugalmechanic.com/auto-parts/chrysler-prowler/steering-rack This message has been edited by David Veu Casovic on 02-09-2010 at 09:50 PM |
catfish POA Site Supporter Prowler Junkie From:scottsdale,az,usa |
posted 02-09-2010 11:19 PM
good to see something else available.if you buy make sure it comes with the inner tie rods.i wonder if these reman racks are from another mopar product.anybody know.i kind of find it hard to believe these racks came from other prowlers.have not heard of anybodys rack wearing out ever.so where are they from. ------------------ |
ivegotsugar POA Site Supporter Prowler Junkie From:Texas |
posted 02-10-2010 10:38 PM
I had my driver side inner tie rod replaced back in Aug 09 ... It was rough trying to find just the inner tie rod since it shows that you have to replace the whole steering rack . However Don Ward ( 832) 717 - 4977),was able to find a part to fit and so far so good . Here is the info ... Mopar Steering Tie Rod part # MR519046 This part came from an 01 - 05 2 door Stratus Cost for part $72.20 Good Luck .... ~ Sugar ~ {Oops I've corrected the Phone #} Thanks Mickey ! Also the inner tie rod will be a different color than the original rod ...Its lighter in color This message has been edited by ivegotsugar on 02-11-2010 at 01:09 AM |
idive POA Site Supporter Prowler Junkie From:Texas USA |
posted 02-10-2010 11:11 PM
I might be wrong, sugar, but I show Don's number you listed was his fax number. I show his shop number to be 832-717-4977. Correct me if I'm wrong. Thanks for the info. I thought I had that, but couldn't find it anywhere. |
All times are CT (US) Top of Page Previous Page | Return to Technical Questions & Answers next newest topic | next oldest topic |
This topic has been transferred to: Prowler Reproduction Parts Discussion | |
All material contained herein, Copyright 2000 - 2012 ProwlerOnline.com
E-Innovations, LP