Home Page | Owners Registry | Discussion Forums | ProwlerMall | Event Scrapbooks | About |
Prowler Products By Gary | Tom Mills / Jefferson Auto |
Bottom of Page | next newest topic | next oldest topic |
Author | Topic: Front suspension coating |
SmoothKat Prowler Enthusiast From:Stockton Ca. USA |
posted 07-21-2020 06:45 PM
So after getting the car polished and ceramic coated, the suspension/ brake calipers, and all other parts that are exposed need to be refreshed. I want to remove all parts and get the powder coated. Can I get advice on how to tackle this project? Anyone that has done this before ? Any advice is welcome, tools needed, do I have to order anything before hand ? Thanks in advance guys. |
DublinOH POA Site Supporter Prowler Junkie From:McMurray, Pa, USA |
posted 07-21-2020 09:39 PM
For what you are going to have in stripping, prep, and painting - just send to Gary for chroming. |
SmoothKat Prowler Enthusiast From:Stockton Ca. USA |
posted 07-22-2020 12:43 AM
I dislike chrome |
Dave Haggas Prowler Junkie From:united kingdom |
posted 07-22-2020 03:07 AM
I stripped mine, ground away all the casting lines. Had them shot lasted all over then clear coated. There is a product on the market for doing aluminium. Can’t recall it’s name mind. I dislike all the cast markings and wanted a stock look but with a twist. |
Dave Haggas Prowler Junkie From:united kingdom |
posted 07-22-2020 03:16 AM
|
Dave Haggas Prowler Junkie From:united kingdom |
posted 07-22-2020 03:20 AM
Sorry for the bad pictures. But you get the idea. This was many years ago... |
SmoothKat Prowler Enthusiast From:Stockton Ca. USA |
posted 07-22-2020 05:40 PM
Dave, that’s a clean look. I want to accomplish something like it. I was thinking black with a clear coat so it doesn’t show dirt or brake dust, and it makes it easy to clean. |
cstall POA Site Supporter Prowler Junkie From:Chandler, AZ USA |
posted 07-23-2020 06:32 PM
quote: If you still have OEM brake pads, you'll got lots of dust. Upgrade to ceramic pads and you'll never have brake dust again! |
SmoothKat Prowler Enthusiast From:Stockton Ca. USA |
posted 07-24-2020 02:09 AM
I still have everything stock. It is dusty but since I don’t drive it much it hasn’t bothered me, but that’s a good idea. I do need advice on tools needed for the job as well as parts |
ed monahan POA Lifetime Site Supporter Prowler Junkie Personal ScrapBook From:Cincinnati, Oh, USA |
posted 07-24-2020 08:34 AM
Ceramic Rasbestos GCD 730 QS You just need a ratchet and socket, probably 13 mm but I can't remember for sure. |
ed monahan POA Lifetime Site Supporter Prowler Junkie Personal ScrapBook From:Cincinnati, Oh, USA |
posted 07-24-2020 08:36 AM
Ceramic Rasbestos PGD 730 QS You just need a ratchet and socket, probably 13 mm but I can't remember for sure. |
ed monahan POA Lifetime Site Supporter Prowler Junkie Personal ScrapBook From:Cincinnati, Oh, USA |
posted 07-24-2020 08:38 AM
Ceramic Rasbestos PGD 730 QS You just need a ratchet and socket, probably 13 mm but I can't remember for sure. The price has dropped quite a bit. Below $40 now. Do the FRONTS ONLY. The rear rotor is aluminum and they will eat the rotor up. |
Beachkat2 POA Site Supporter Prowler Junkie From:Wasaga Beach, Ontario, Canada |
posted 07-24-2020 08:40 AM
Another option is the stainless steel A-arm covers. I wrapped my covers with carbon fiber wrap and they look good IMO. |
Randy Hamilton POA Site Supporter Prowler Junkie From:tempe, AZ usa |
posted 07-24-2020 11:11 AM
Another option is to have the a-arms and yoke, which are aluminum polished. This will give you a look almost as good as chrome at less cost. See Pat's Video 18 to see what this looks like. |
SmoothKat Prowler Enthusiast From:Stockton Ca. USA |
posted 07-24-2020 03:11 PM
I need help and advice on suspension not brakes guys. I want to remove everything and coat it. I guess this got lost in the last comment. Do I need to buy bushings? Ball joints need to be replaced by the simple fact that I removed the arms or if it’s in good condition be reused again? Etc.. |
SmoothKat Prowler Enthusiast From:Stockton Ca. USA |
posted 07-24-2020 03:13 PM
Beachkat2 do you have pictures to share on how yours look? Advice on taking the suspension off? Or you didn’t take it off? |
hemidan Prowler Junkie From:Blenheim, New Jersey, United States |
posted 07-31-2020 09:47 PM
Ed, you posted the same thing three times. You are worse than me with my double post. lol |
All times are CT (US) Top of Page Previous Page | Return to Technical Questions & Answers next newest topic | next oldest topic |
All material contained herein, Copyright 2000 - 2020