Home Page Owners Registry Discussion Forums ProwlerMall Event Scrapbooks About
Prowler Products By Gary Tom Mills / Jefferson Auto Prowler-Parts.Com
Call Gary E at Prowler Products By Gary - Formerly Carlini Design Call Tom for the BEST Park/Turn Signal Relocation Kit Prowler-Parts.Com

Click here to return to the Prowler Online Board Main Page 		  ProwlerOnline, Plymouth/Chrysler Prowler Discussion Forum
  Free Classified Ads
  BALL JOINT BILLET CAP (Page 1)

Post New Topic  Post A Reply
edit profile | register | preferences | faq | search

   Bottom of Page
This topic is 2 pages long:   1  2  		next newest topic | next oldest topic
Author Topic:   BALL JOINT BILLET CAP
ZPROWLER2000

Prowler Junkie

From:NEW YORK
Registered: May 2006
Admin Use

posted 02-03-2014 06:14 AM     Click Here to See the Profile for ZPROWLER2000     send a private message to ZPROWLER2000   Edit/Delete Message   Reply w/Quote   Search for more posts by ZPROWLER2000
I'M LOOKING FOR 1 FACTORY UPPER BALL JOINT NEW OR USED I'M IN THE PROCESS OF MAKING A BILLET CAP THAT GOES OVER THE BALL JOINT,THANK YOU FOR YOUR HELP

This message has been edited by ZPROWLER2000 on 05-29-2014 at 06:11 PM

catfish




POA Site Supporter
Prowler Junkie

From:scottsdale,az,usa
Registered: Jun 2001
Admin Use

posted 02-03-2014 11:02 AM     Click Here to See the Profile for catfish     send a private message to catfish   Edit/Delete Message   Reply w/Quote   Search for more posts by catfish
4815306 mopar.around 15.00 each

------------------

phil2237


POA Site Supporter
Prowler Junkie

From:PLACENTIA CALIFORNIA
Registered: Feb 2005
Admin Use

posted 02-03-2014 11:23 AM     Click Here to See the Profile for phil2237     send a private message to phil2237   Edit/Delete Message   Reply w/Quote   Search for more posts by phil2237
Contact Gary Empfield as he can steer you in the right direction
GaryE





POA Site Supporter and Vendor
Prowler JunkieProwler Products by Gary

From:Laguna Woods, CA, USA
Registered: Aug 2000
Admin Use

posted 02-03-2014 01:06 PM     Click Here to See the Profile for GaryE     send a private message to GaryE   Edit/Delete Message   Reply w/Quote   Search for more posts by GaryE
They are not available. They are part of the upper a-arm. Maybe you can get lucky and find someone with a old defective one. Why not use the old plastic cap as a model? Or if you have a Prowler just use the one on your car. You do not need to remove the ball joint to get your need information to make a new one.

------------------

alrtg



POA Site Supporter
Prowler Junkie

From:Westminster, MD, USA
Registered: Dec 2008
Admin Use

posted 02-03-2014 05:16 PM     Click Here to See the Profile for alrtg     send a private message to alrtg   Edit/Delete Message   Reply w/Quote   Search for more posts by alrtg
PM sent.
idive


POA Site Supporter
Prowler Junkie

From:Texas USA
Registered: Apr 2003
Admin Use

posted 02-05-2014 04:58 PM     Click Here to See the Profile for idive     send a private message to idive   Edit/Delete Message   Reply w/Quote   Search for more posts by idive
quote:
Originally posted by GaryE:
They are not available. They are part of the upper a-arm. Maybe you can get lucky and find someone with a old defective one. Why not use the old plastic cap as a model? Or if you have a Prowler just use the one on your car. You do not need to remove the ball joint to get your need information to make a new one.

They must be available. The part number and price for it were posted. I have to say, at around $15.00 each, the upper ball joints are alot cheaper than I thought they were.
GaryE





POA Site Supporter and Vendor
Prowler JunkieProwler Products by Gary

From:Laguna Woods, CA, USA
Registered: Aug 2000
Admin Use

posted 02-06-2014 03:04 PM     Click Here to See the Profile for GaryE     send a private message to GaryE   Edit/Delete Message   Reply w/Quote   Search for more posts by GaryE
I think there is some confusion. The part number 4815306 is a control arm bushing, not a ball joint. The upper a-arm ball joint cannot be puchased. It comes as part of the a-arm.

------------------

catfish




POA Site Supporter
Prowler Junkie

From:scottsdale,az,usa
Registered: Jun 2001
Admin Use

posted 02-06-2014 03:34 PM     Click Here to See the Profile for catfish     send a private message to catfish   Edit/Delete Message   Reply w/Quote   Search for more posts by catfish
gary youre correct and i was wrong,was looking at wrong line in crashbook.idive *** you cheap pos.

------------------

beachcat



BANNED

From:Ontario, Canada
Registered: Jul 2011
Admin Use

posted 03-13-2014 08:46 PM     Click Here to See the Profile for beachcat     send a private message to beachcat   Edit/Delete Message   Reply w/Quote   Search for more posts by beachcat
quote:
Originally posted by ZPROWLER2000:
[B]I'M LOOKING FOR 1 FACTORY UPPER BALL JOINT NEW OR USED I'M IN THE PROCESS OF MAKING A BILLET CAP THAT GOES OVER THE BALL JOINT,THANK YOU FOR YOUR HELP[/B]

Did you ever find one? I have a bent UCA with a good ball joint.

MDProwler



POA Site Supporter
Prowler Junkie

From:Fallston,MD USA
Registered: Jul 2003
Admin Use

posted 03-13-2014 09:04 PM     Click Here to See the Profile for MDProwler     send a private message to MDProwler   Edit/Delete Message   Reply w/Quote   Search for more posts by MDProwler
quote:
Originally posted by GaryE:
They are not available. They are part of the upper a-arm. Maybe you can get lucky and find someone with a old defective one. Why not use the old plastic cap as a model? Or if you have a Prowler just use the one on your car. You do not need to remove the ball joint to get your need information to make a new one.

Correct. I needed uppers and had to modify a set from a 90's Plymouth Breeze. The bore on the control arm was about .005" too small to accept the Breeze balljoint. Turned them down and they have been fine for over 5 years.
They are taller then the Prowler ones though and the cap doesn't fit on the same.

ZPROWLER2000

Prowler Junkie

From:NEW YORK
Registered: May 2006
Admin Use

posted 03-14-2014 08:50 AM     Click Here to See the Profile for ZPROWLER2000     send a private message to ZPROWLER2000   Edit/Delete Message   Reply w/Quote   Search for more posts by ZPROWLER2000
quote:
Originally posted by beachcat:
Did you ever find one? I have a bent UCA with a good ball joint.

PRICE PLEASE

TooHipCat


POA Site Supporter
Prowler Junkie

From:Londonderry,NH
Registered: Mar 2004
Admin Use

posted 03-19-2014 01:30 AM     Click Here to See the Profile for TooHipCat     send a private message to TooHipCat   Edit/Delete Message   Reply w/Quote   Search for more posts by TooHipCat
quote:
Originally posted by MDProwler:
Correct. I needed uppers and had to modify a set from a 90's Plymouth Breeze. The bore on the control arm was about .005" too small to accept the Breeze balljoint. Turned them down and they have been fine for over 5 years.
They are taller then the Prowler ones though and the cap doesn't fit on the same.

AWESOME Gary!!!

TooHipCat


POA Site Supporter
Prowler Junkie

From:Londonderry,NH
Registered: Mar 2004
Admin Use

posted 03-23-2014 01:29 AM     Click Here to See the Profile for TooHipCat     send a private message to TooHipCat   Edit/Delete Message   Reply w/Quote   Search for more posts by TooHipCat
quote:
Originally posted by TooHipCat:

[B]AWESOME Gary!!!

Have you thought about manufacturing and selling a few sets Gary?

I'm sure several of us may be interested.

This message has been edited by TooHipCat on 03-23-2014 at 01:29 AM

ZPROWLER2000

Prowler Junkie

From:NEW YORK
Registered: May 2006
Admin Use

posted 05-28-2014 06:45 AM     Click Here to See the Profile for ZPROWLER2000     send a private message to ZPROWLER2000   Edit/Delete Message   Reply w/Quote   Search for more posts by ZPROWLER2000
[img]http://www.prowleronlin e.com/ubb/image_uploads/prowler_caps_s.jpg[/img][img]http://www.prowleronline.com/ubb/image_uploads/PPP/prow ler_caps_s.jpg[/img][img]htt p://www.prowleronline.com/ubb/image_uploads/PPP/prowler_caps_s.jpg[/img]
xtreme prowler



POA Site Supporter
Prowler Junkie

From:Halifax,Nova Scotia, Canada
Registered: Jun 2009
Admin Use

posted 05-28-2014 06:50 AM     Click Here to See the Profile for xtreme prowler     send a private message to xtreme prowler   Edit/Delete Message   Reply w/Quote   Search for more posts by xtreme prowler
Nice !

did you only make one set ?... ( pretty sure that is a hint )

ZPROWLER2000

Prowler Junkie

From:NEW YORK
Registered: May 2006
Admin Use

posted 05-28-2014 07:07 AM     Click Here to See the Profile for ZPROWLER2000     send a private message to ZPROWLER2000   Edit/Delete Message   Reply w/Quote   Search for more posts by ZPROWLER2000
quote:
Originally posted by xtreme prowler:
Nice !

did you only make one set ?... ( pretty sure that is a hint )

I HAVE A FEW SETS,JUST WANT TO SEE IF THERES A DEMAND OR NOT,IF THERES A DEMAND I CAN MASS PRODUCE BUT THESE AREN'T CHEAP,

xtreme prowler



POA Site Supporter
Prowler Junkie

From:Halifax,Nova Scotia, Canada
Registered: Jun 2009
Admin Use

posted 05-28-2014 07:29 AM     Click Here to See the Profile for xtreme prowler     send a private message to xtreme prowler   Edit/Delete Message   Reply w/Quote   Search for more posts by xtreme prowler
pm sent
DrillinU



POA Site Supporter
Prowler Junkie

From:NY, USA
Registered: Sep 2012
Admin Use

posted 05-28-2014 09:31 AM     Click Here to See the Profile for DrillinU     send a private message to DrillinU   Edit/Delete Message   Reply w/Quote   Search for more posts by DrillinU
Very Nice, Jeff
Did you come up with a price yet?
quote:
Originally posted by ZPROWLER2000:

This message has been edited by DrillinU on 05-28-2014 at 09:32 AM

ZPROWLER2000

Prowler Junkie

From:NEW YORK
Registered: May 2006
Admin Use

posted 05-28-2014 09:53 AM     Click Here to See the Profile for ZPROWLER2000     send a private message to ZPROWLER2000   Edit/Delete Message   Reply w/Quote   Search for more posts by ZPROWLER2000
NO PRICING YET GIVE ME A WEEK OR SO,STILL HAVE SOME EARTH MAGNET ISSUES TOO WORKOUT
ZPROWLER2000

Prowler Junkie

From:NEW YORK
Registered: May 2006
Admin Use

posted 05-28-2014 10:34 AM     Click Here to See the Profile for ZPROWLER2000     send a private message to ZPROWLER2000   Edit/Delete Message   Reply w/Quote   Search for more posts by ZPROWLER2000
ALRTG(ANDRIA)WILL GET A SET SHIPPED TO HER ON FRIDAY,SHE WILL LET ME KNOW WHAT SHE THINKS AND TELL ME IF I NEED TO CHANGE ANYTHING,SHE'S THE BRAINS OF THIS PROJECT, I COULD NEVER DO IT WITHOUT HER, SHE IS HELPFUL AND FULL OF KNOWLEDGE

This message has been edited by ZPROWLER2000 on 05-31-2014 at 01:35 PM

Hamlyn

Prowler Junkie

From:Plano, TX
Registered: Jul 2013
Admin Use

posted 05-28-2014 11:31 AM     Click Here to See the Profile for Hamlyn     send a private message to Hamlyn   Edit/Delete Message   Reply w/Quote   Search for more posts by Hamlyn
Now I confuse (!!!!). I thought Alrtg was a gurl... izzat not so anymore?
StingRay




POA Site Supporter
Prowler Junkie

From:Elk Grove Village, IL, USA
Registered: Sep 2010
Admin Use

posted 05-28-2014 12:09 PM     Click Here to See the Profile for StingRay     send a private message to StingRay   Edit/Delete Message   Reply w/Quote   Search for more posts by StingRay
quote:
Originally posted by Hamlyn:
Now I confuse (!!!!). I thought Alrtg was a gurl... izzat not so anymore?

** , maybe a trip to Denmark was made ... or is that where they go from guy to girl and not the reverse

These caps look very nice. Especially for anyone with the chrome front end treatment!

ZPROWLER2000

Prowler Junkie

From:NEW YORK
Registered: May 2006
Admin Use

posted 05-30-2014 09:35 PM     Click Here to See the Profile for ZPROWLER2000     send a private message to ZPROWLER2000   Edit/Delete Message   Reply w/Quote   Search for more posts by ZPROWLER2000
quote:
Originally posted by ZPROWLER2000:
[img]http://www.prowleron lin e.com/ubb/image_uploads/prowler_caps_s.jpg[/img][img]http://www.prowleronline.com/ubb/image_uploads/PPP/prow ler_caps_s.jpg[/img][img]htt p://www.prowleronline.com/ubb/image_uploads/PPP/prowler_caps_s.jpg[/img]

WORKING ON A GROUP PURCHASE WITH THE MACHINE SHOP

ZPROWLER2000

Prowler Junkie

From:NEW YORK
Registered: May 2006
Admin Use

posted 05-30-2014 09:37 PM     Click Here to See the Profile for ZPROWLER2000     send a private message to ZPROWLER2000   Edit/Delete Message   Reply w/Quote   Search for more posts by ZPROWLER2000

This message has been edited by ZPROWLER2000 on 05-30-2014 at 09:40 PM

u00tjs2
a

POA Site Supporter
Prowler Junkie

From:ft wayne, in, USA
Registered: Jan 2013
Admin Use

posted 05-31-2014 06:46 AM     Click Here to See the Profile for u00tjs2     send a private message to u00tjs2   Edit/Delete Message   Reply w/Quote   Search for more posts by u00tjs2
I'd take a set Let us know...

------------------
[img]http://www.prowleronline.com/ubb/smilies/blueprowl.gif[/img]


This topic is 2 pages long:   1  2 

All times are CT (US)  Top of Page  Previous Page

 Return to Free Classified Ads  next newest topic | next oldest topic



Administrative Options: Close Topic |Make Sticky | Archive/Move | Delete Topic
Post New Topic  Post A Reply
Hop to:

Contact Us | Prowler Online Homepage

All material contained herein, Copyright 2000 - 2012 ProwlerOnline.com
E-Innovations, LP

POA Terms of Service